Scanning An Image Into Your Macintosh ®; Scanning A Whole Page - Brother 420CN - MFC Color Inkjet User Manual

Scanning an image into your Macintosh
You can scan a whole page
—OR—
scan a portion after pre-scanning the document.

Scanning a whole page

1
Load your document in the ADF.
If your model is a flatbed type, you can also place your
document on the scanner glass.
2
Adjust the following settings, if needed, in the Scanner Setup
dialog box:
Resolution
Color Type
Scanning Area
Brightness
Contrast
3
Click Start.
When scanning has finished, the image will appear in your
graphics application.
USING YOUR MACHINE WITH A MACINTOSH
®
®
8 - 15