Quiet Operation; Comfort Sleep Operation - Toshiba Ras-B13B2Kvg-E1 Service Manual

9. AUTO RESTART FUNCTION SETTING
This product is designed so that, after a power failure, it can restart automatically in the same
operating mode as before the power failure.
Information
The product is shipped with Auto Restart function in the ON position. Turn it OFF if this function is not required.
How to turn OFF the Auto Restart Function
Press and hold the [OPERATION] button on the indoor unit for 3 seconds (3 beep sounds but OPERATION
lamp does not blink).
How to turn ON the Auto Restart Function
Press and hold the [OPERATION] button on the indoor unit for 3 seconds (3 beep sounds and OPERATION
lamp blink 5 time/sec for 5 seconds).
Note: In case of ON timer or OFF timer are set, AUTO RESTART OPERATION does not activate.

10. QUIET OPERATION

Press : Start and stop the operation.
QUIET
Note: Under certain conditions, QUIET operation may not provide adequate
cooling due to low sound features.

11. COMFORT SLEEP OPERATION

To save energy while sleeping, automatically control air flow and automatically turn OFF.
Press : Select 1, 3, 5 or 9 hrs for OFF timer operation.
Note: The cooling operation, the set temperature will increase automatically
1 degree/hour for 2 hours (maximum 2 degrees increase). For heating operation,
the set temperature will decrease.
12. 8°C HEATING OPERATION
1. Press operation button to change to 8°C set temperature heating operation.
8°C
2. Press to adjust setting temperature from 5°C to 13°C.
Note: 8°C will operate in Heating mode only. If Air conditioner performs in cooling operation
(including automatic cooling) or dry operation it will change to heating operating.
13. SILENT OPERATION
SILENT OPERATION (
Keep outdoor unit operating silently to ensure either yourself or neighborhood will have a tight sleep in
nighttime. By this feature, the heating capacity will be optimized to deliver such silent experience.
The silent operation can be selected from one of two purposes (Silent 1 and Silent 2).
There are three setting parameters: Standard level > Silent 1 > Silent 2
Silent 1:
Though operating silently, the Heating (or Cooling) capacity is still prioritized to ensure having sufficient
comfort inside the room.
This setting is a perfect balance between the Heating (or Cooling) capacity and the Sound level of
outdoor unit.
Silent 2:
Compromising the Heating (or Cooling) capacity to the Sound level in any circumstance where the
outdoor unit's sound level is highly prioritized.
This setting has a purpose to reduce the maximum sound level of outdoor unit by 4 dB(A).
Note:
While activating of Silent operation, inadequate heating (or cooling) capacity may occur.
●
Silent Operation (Outdoor Unit)
Press
)
SILENT#1 SILENT#2
- 49 -
None