Operating Instructions - Black & Decker Bhtc650R Instruction Manual

SET UP & USE
OSCILLATION
DECREASE (Temperature

OPERATING INSTRUCTIONS

Place the heater on a firm, level surface and plug the unit directly into a 120V AC
electrical outlet.
NOTE: Only operate heater in upright position. When the heater is plugged in, it will
be in standby mode.
Press ON/OFF
ON/OFF again to turn off the heater at any time.
NOTE: If the heater has been running on Low, High or ECO mode, when powering
OFF, the display will count down and run the FAN only mode for 30 seconds to cool
the heater down.
MODE
Press the M button repeatedly to scroll through, Low Heat, High Heat, ECO and
return to fan mode.
Setting to Temperature Levels 59-95 °F
In either High or Low Heat mode, press +
and press - to decrease the set temperature by 1°F increments each time you press
until the selected temperature is reached. The selected temperature, with the low and
high heat indicator lights, will blink on the digital display. The blinking stops once the
set temperature is reached.
NOTE: Temperatures cannot be selected in ECO or Fan mode.
Fan
- Operates a fan only function. The fan indicator light will display.
ECO - ECO mode automatically cycles between low and high heat based on the room
temperature, maximizing comfort while using lower wattage settings to save energy.
Specific temperatures cannot be selected in this mode.
OSCILLATION
again to shut off this function.
TIMER
Automatically shuts the unit OFF. Press the TIMER
buttons to set an amount of time within 24 hours for the unit to shut off. Press
the button again to select it. The remaining amount of time will be indicated on the
digital display.
TIMER
and Time)
to turn on the heater. It will operate in FAN mode by default. Press
- Pressing this button will activate the oscillating air flow. Press
DIGITAL DISPLAY
MODE
INCREASE (Temperature
and Time)
to increase the set temperature by 1°F
and use the UP
POWER
and DOWN
Page 9