Dicota Laser USB Notebook Mouse Stream User Manual page 3

Safety notice:
1. This product complies with IEC 60825-1, class 1 laser product.
2. This product complies with FCC and CE rules.
3. This product has no serviceable parts. Use of controls or adjustments
of procedures other than the user guide mentiones may result in mal-
function or dangerous.
SETUP the Mouse
The mouse is connected to your computer via the USB cable. It needs to be
plugged in to your Notebook or PC by a USB port or a mouse port.
For PS/2 mouse port installation
Please turn off your computer before installing your mouse.
Plugging and unplugging cables to your computer's mouse
port while the computer is running can damage the mouse
port or your computer.
For USB port installation
Windows 98 (or higher) is required for USB port installation.
Connect the receiver cable to the USB port on the computer.
For Windows, you may be prompted to insert the Windows
software CD.
Insert the Windows driver CD into the computer's CD-ROM drive when asked
to do so. Follow the instructions steps.
CAUTION:
Change or modifications not expressly approved by the manufacturer
responsible for compliance could void the user's authority to operate the
equipment.
3
PS2 Mouse Port
USB Port