Electrical Requirements - Kitchenaid 5Ksm45A Series Instructions Manual

PRODUCT SAFETY
12. Children should be supervised to ensure that they do not play with the appliance.
13. If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent, or similarly qualified persons in order to avoid a hazard.
14. Never leave the appliance unattended while it is in operation.
15. To avoid product damage, do not use the Stand Mixer Bowls in areas of high
heat such as an oven, microwave, or on a stovetop.
16. Allow the appliance to cool completely before putting on or taking off parts, and
before cleaning the appliance.
17. Refer to the "Care and Cleaning" section for instructions on cleaning the
surfaces in contact with food.
18. This appliance is intended to be used in household and similar applications such
as:
- staff kitchen areas in shops, offices, or other working environments;
- farmhouses;
- by clients in hotels, motels and other residential type environments;
- bed and breakfast type environments.
SAVE THESE INSTRUCTIONS
Instructions are also available online, visit our website at:
www.kitchenaid.com.au

ELECTRICAL REQUIREMENTS

Electrical Shock Hazard
Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire, or electrical shock.
4
W11556021C.indd 4 W11556021C.indd 4
or www.KitchenAid.co.nz
Power:
300 W max.
For 5KSM125 - 5KSM200 Series
275 W max.
For 5K45, 5KSM45 - 5KSM100 Series
Voltage: 220-240 V
Frequency: 50-60 Hz
NOTE: If the plug does not fit in the
outlet, contact a qualified electrician.
Do not modify the plug in any way.
Do not use an adapter.
Do not use an extension cord. If the power
supply cord is too short, have a qualified
electrician or service technician install an
outlet near the appliance.
7/6/2022 2:46:03 PM 7/6/2022 2:46:03 PM