Red Hat ENTERPRISE LINUX 5 Configuration Manual page 16

Chapter 2. Configuring an APC Switch as a Fence Device
5. At the Add a Sharable Fence Device page, click the drop-down box under Fencing Type and
select APC Power Switch. This causes Conga to display the components of an APC Power
Switch fencing type, as shown in
Figure 2.2. Adding a Sharable Fence Device
6. For Name, enter apcfence.
7. For IP Address, enter 10.15.86.96.
8. For Login, enter apclogin.
9. For Password, enter apcpword.
10. For Password Script, leave blank.
11. Click Add this shared fence device.
Clicking Add this shared fence device causes a progress page to be displayed temporarily. After
the fence device has been added, the detailed cluster properties menu is updated with the fence
device under Configure a Fence Device.
6
Figure 2.2, "Adding a Sharable Fence Device".