Multi-Band Equalizer; Sound Field Expander - Turtle Beach Ear Force XP500 User Manual

User's guide
Hide thumbs Also See for Ear Force XP500:
Table of Contents

Advertisement

www.TurtleBeach.com

Multi-Band Equalizer

The multi-band equalizer lets you change the tone of the game sound. The sliders will boost
or cut the designated frequencies by +/-12dB. The frequencies for each slider are:
Low: 100Hz shelving filter
Mid 1: 250Hz band-pass filter
Mid 2: 1kHz band-pass filter
Mid 3: 4kHz band-pass filter
High: 8kHz shelving filter
The Low and High shelving filters provide a bass and treble boost. The Mid 1, 2 and 3 band
pass filters provide a resonant boost or cut at the specified frequency.
 TIP: Double clicking a slider sets it to the center position (zero boost and cut)

Sound Field Expander

The sound field expander can be used for widening a stereo sound field, boosting center
sounds and accentuating sounds from the left and right sides. The signal flow of the
expander is shown below. The left and right channels are processed independently and split
into four paths.
The "Through" path (T) is the direct unmodified sound. The level of this path is
controlled by the TGain slider.
The Low Pass Filter path (L) filters out frequencies above 200Hz. The level of this path
is controlled by the LGain slider.
The High Pass Filter path (H) filters out frequencies below 200Hz. The level of this path
is controlled by the HGain slider.
The left and right High Pass Filter paths are added or subtracted from each other to
form a mono signal that is added to the original high-pass filter signals. The
add/subtract amount is set by the MGain slider.
Page 26

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xp500 advanced sound editor

Table of Contents