Hinkley HIRO 980014FWH-R Quick Manual

QUICK PAIRING GUIDE
STEP 1: Disconnect power to all fans at the breaker or wall switch.
NOTE: Turning the power off with the remote or wall control is not suffi cient. Power must
be cut to the fans via breaker or wall switch. For multiple fans on the same circuit, the
power must be disconnected at the canopy connection for the fan(s) NOT being paired.
HOW TO PAIR
YOUR HIRO REMOTE
STEP 2: Restore power ONLY to the fan
being paired.
STEP 3: Within 60 seconds of power
being restored, press the FAN ON/OFF
button for 3 seconds and hold.
NOTE: Fan will start on low speed and
the light will turn on. Light will fl ash
twice and the fan will turn off . This
indicates successful pairing.
FOR MORE INFORMATION ON THE HIRO REMOTE
VISIT HINKLEY.COM/FANS OR CALL 1(800) 446-5539
FOR TROUBLESHOOTING NEEDS
DELETING UNWANTED
HIRO REMOTE PAIRINGS
STEP 2: Restore power ONLY to the fan
being corrected to a single HIRO pairing.
STEP 3: Within 60 seconds of power
being restored, press the FAN ON/OFF
button for 8 seconds and hold.
NOTE: Light will fl ash twice and an
audible "beep" will sound three times
(6 speed DC fans). Now the fan should
only respond to the HIRO control
used to perform the 8 second pairing.
FAN ON/OFF