Charging; Pairing New Bluetooth Devices; Playback From Audio Devices - Creative WP-350 Quick Start Manual

EN
Thank you for selecting Creative WP-350 wireless
headset. This documentation aims to guide you in
making full use of the headset. Fully charge the headset
before first use. Then you need to "pair" the headset once
with your Bluetooth audio or mobile device before enjoying
subsequent automatic connection.
Charging headset
• Connect the Left earcup to your laptop or computer
using the supplied USB cable
• On the Left earcup, the indicator lights up in Red.
When fully charged, this indicator turns Green
• You can listen and operate the headphones while

charging

Pairing new Bluetooth devices

• Press and hold the Multifunction button for more than 5
seconds on the Right earcup until the indicator lights up
in Blue and blinking rapidly
• Turn on Bluetooth search function on your audio or
mobile device
• Select "Creative WP-350 Headset" and if prompted for a
Passcode, key in "0000"
• Once paired, the Blue indicator on the Right earcup
blinks slowly
• Note that when pairing with a computer, connect the
headset as a Hands-free Audio or Headset device
instead of a Stereo Audio device in order to make
use of the microphone function. If microphone function
is not needed, it is recommended to connect as a Stereo
Audio device for better playback performance. Certain
Bluetooth solution detects the application that you are
using and configures the microphone automatically. You
are recommended to update your computer's Bluetooth
drivers to the latest.

Playback from audio devices

• Turn on Bluetooth function on your paired audio device
• Press and hold the Multifunction button on the Right