After Installing The Unit - Pioneer AVIC-80DVD Installation Manual

Dvd navigation unit
Hide thumbs Also See for AVIC-80DVD:
Table of Contents

Advertisement

Available languages

Available languages

After installing the unit

1. Reconnecting the battery.
First, double-check that all connections are correct and that the unit is installed correctly.
Reassemble all car components that you previously removed. Then reconnect the negative
(–) cable to the negative (–) terminal of the battery.
2. Start the engine.
3. Press the reset button on the main unit.
Press the reset button on the main unit using a pointed object such as the point of a pen.
4. Set the navigation system.
Set the navigation system as explained in the "Operation Manual"
Manual"
.
Reset button
or "Hardware
30

Advertisement

Table of Contents
loading

Table of Contents