Receiving A Call; Call Waiting; During A Call; Other Functions - Kenwood KCA-BT300 Instruction Manual

Receiving a call

Answering a Phone Call
Model-D-1: Press the Control knob or one of [1] – [6]
buttons
Model-D-2: Press the [VOL] button or one of [1] – [6]
buttons
☞ Inserting a disc such as a CD will disconnect your call.
Rejecting an Incoming Call
Press the [SRC] button.

Call waiting

Answering Another Incoming Call with the
Current Call Suspended
1. Model D-1: Press the Control knob.
Model D-2: Press the [VOL] knob.
2. Push the Control knob towards up or down. Select
the "ANSWER" display.
3. Model D-1: Press the Control knob.
Model D-2: Press the [VOL] knob.
Answering another Incoming Call after
Terminating the Current Call
Press the [SRC] button.
Continuing the Current Call
1. Model D-1: Press the Control knob.
Model D-2: Press the [VOL] knob.
2. Push the Control knob towards up or down. Select
the "REJECT" display.
3. Model D-1: Press the Control knob.
Model D-2: Press the [VOL] knob.
Answering the Waiting Call after Terminating the
Current Call
Press the [AUTO]/ [TI] button for at least 1 second.
Switching between the Current Call and Waiting
Call
Model D-1: Press the Control knob.
Model D-2: Press the [VOL] knob.

During a call

Disconnecting a Call
Press the [SRC] button.
Switching to the Private Mode (
Press the [38] button.
Switches between Private talk ("PV TALK") or Hands-
free talk ("HF TALK") when pressed.
Adjusting the Voice Volume during a Call
Model D-1: Turn the Control knob.
Model D-2: Turn the [VOL] knob.

Other functions

Clearing the Disconnection Message
Press the [AUTO]/ [TI] button for at least 1 second.
Switching between Display Modes
Press the [AUTO]/ [TI] button. You can switch
between the Phone Book and the Call List.
Registering to the Preset Dial Number List
1. Enter the phone number you wish to register
Enter the phone number with reference to the
following:
Dial a number/ Calling a number in the call log/
Calling a number in the Phone Book
2. Select the button you wish to register
Press the [1] – [6] button for at least 2 seconds.
3. Exit the dialing method selection mode
Press the [MENU] button.
Items Set in Menu mode
* To enter the Menu mode, press the Control knob for
at least 1 second.
Display
"DVC REGIST"*/
"DVC REG"*
"S-DVC SELECT"*/
"SDVC SEL"*
"PHONE SEL"*/
"PHN-SEL"*
"DIALING MODE"*/
"D.MODE"*
"AUDIO SEL"*/
"AUD-SEL"*
"SMS DOWNLOAD"*/
"SMS DL"*
"SMS INBOX"*/
"INBOX"*
"VOICE TAG"*/
"VOICETAG"*
"VOICE RECOG"*/
"V-RECOG"*
"DEVICE DEL"*/
"DVC-DEL"*
"DVC-STATUS"/
"D-STATUS"
"PIN EDIT"*
"AUTO ANS"/
)
"ANS"
"SP SEL"/
"SPK"
"CALL BEEP"/ "C-BP"
Setting overview
Register a Bluetooth device (pairing). See page 20.
Allow registration of a special device that cannot be
registered normally. See page 21.
Select a cell-phone subject to hands-free connection.
See page 22.
Select a dialing method. See page 12.
Select the audio player to be connected. See page 22.
Download a short message. See page 24.
Display the received short message. See page 24.
Register the voice tag for "voice recognize". See page 22.
Make a voice dialing call. See page 12.
Cancel registration of the Bluetooth device. See page 22.
"HF-CONNECT"/ "AD-CONNECT"/ "BAT"/ "SGNL":
Display the status of the Bluetooth device. See page 30.
Specify the PIN code required when registering this unit
using the Bluetooth device. See page 21.
"OFF"/ "0" – "99": Answer a call automatically after
lapse of the preset time interval for automatic answer.
See page 30.
"FRT"/ "F-R"/ "F-L": Specify the voice output speaker.
See page 30.
"ON"/ "OFF": Output a beep from the speaker when a
call comes in. See page 30.
English
| 13