Basic Operation Of Hands-Free Phoning (Model-C); Before Use; Making A Call - Kenwood KCA-BT300 Instruction Manual

Basic Operation of hands-free phoning (Model-C)

Before Use

• You need to register your cell-phone before using
it with this unit. For more details, see <Registering
Bluetooth device> (page 20).
• If you have registered two or more cell-phones,
you need to select one of them. For more details,
see <Selecting the Bluetooth device You Wish to
Connect> (page 22).
• To use the Phone Book, it must be downloaded to
this unit in advance. For details, see <Downloading
the Phone Book> (page 21).
• For the method of operation in the Menu mode,
refer to the Instruction Manual for Control Unit.
• For more information regarding the function with
[ ] mark, see <Function Note> (page 30).

Making a call

Dialing Method
1. Entry dialing method mode
Press the [MUTE] button for at least 1 second.
2. Enter dialing method selection mode
Turn the [VOL] knob to select "Dialing Mode", and
then press the [ENTER] button.
3. Select a dialing method
Press the [ENTER] button.
"DIAL" » "INITIAL" » "P-BOOK" » "OUT-CALL" »
"INCALL" » "MIS-CALL"
3
Methods of operations in the above modes are
described below.
4. Exit the dialing method selection mode
Press the [MUTE] button for at least 1 second.
3
Dial a number ( )
2-1. Select the "DIAL" display.
2-2. Enter a phone number
Operation type
Select the characters
Determine the characters.
Delete the characters.
2-3. Make a call
Press the [ENTER] button on the remote controller.
☞ You can input max 32 digits.
3
Speed dialing (Preset dial)
2-1. Select the "DIAL" display.
2-2. Select the preset dial number
Press the [1] – [6] button.
2-3. Make a call
Press the [ENTER] button for at least 1 second.
☞ You need to register the preset dial number. (page 11)
10 |
KCA-BT300
Operation
Turn the [VOL] knob.
Press the [ ] button.
Press the [ ] button.
3
Calling a number in the call log (
2-1. Select the "OUT-CALL" (outgoing call), "INCALL"
(incoming call), or "MIS-CALL" (missed call) display.
2-2. Select a name or phone number
Press the [ ] or [ ] button.
u d
2-3. Make a call
Press the [38] button for at least 1 second.
3
Calling a number in the Phone Book (
2-1. Select the "INITIAL" display, proceed to step 2-2.
Select the "P-BOOK" display, proceed to step 2-3.
2-2. Select the initial to be searched for
Operation type Operation
Move to the next
Turn the [VOL] knob or press the [
character.
[ ] button.
Move to the next row. Press the [
Determine the Press the [ENTER] button for at least 1 second.
selected initial.
2-3. Select the name
Operation type Operation
Move to the next Turn the [VOL] knob or press the [
phone number. [ ] button.
d
Move to the next
Press the [
name.
2-4. Make a call
Press the [ENTER] button for at least 1 second.
Make a voice dialing call
1. Enter Bluetooth menu mode
Press the [MUTE] button for at least 1 second.
2. Enter voice dialing call mode
Turn the [VOL] knob to select "Voice Recognize".
3. Press the [ENTER] button.
"Ready?" is displayed.
4. Press the [ENTER] button.
"PB Name?" is displayed.
When a beep is heard, say the name within 2
seconds.
5. Press the [1] button.
"PN Type?" is displayed.
When a beep is heard, say the category within 2
seconds.
6. Make a call
This step is the same as step 3 of the procedure in
<Calling a number in the Phone Book>. You can
make a call or select a category.
☞ If your voice cannot be recognized, a message is
displayed. Pressing the [ENTER] button allows you to
retry voice input. See page 34.
☞ Both the name and category requires registration of a
voice tag. See page 22.
☞ Audio sound is not output during voice recognition.
)
)
] or
] or [ ] button.
u d
] or
u
] or [ ] button.