HighPoint ATA-133 RAID User Manual page 15

2.1 Enter BIOS Configuration Utility
When the following information appears on screen during the computer is starting,
press CTRL+H key to enter BIOS configuration utility.
The main interface of BIOS configuration utility is as below:
Main Menu: This column lists all currently available operation commands.
Help: This column gives help information about the current selected
item and the prompts on available operations.
Status: This column lists all the hard disks and disk arrays connected
to the adapter. When this column is activated, user can select
the target device to perform a specific operation.
2.2 Create Disk Array
Follow these steps to create a disk array:
1. Within the Menu
Create Array command and press ENTER to call out the list of creation
steps:
2-1
column of main interface, use the arrow key to highlight the
BIOS Configuration Utility