Left-Hand Stalk Switch - Volvo C30 Owner's Manual

Web edition
Hide thumbs Also See for C30:
Table of Contents

Advertisement

02 Instruments and controls

Left-hand stalk switch

Stalk switch positions
02
1. Short flash sequence, direction indicators
2. Continuous flash sequence, direction
indicators
3. Main beam flash
4. Switching, main and dipped beam, and
home safe lighting
Direction indicators
Continuous flash sequence
– Move the stalk switch up or down to end
position (2).
The stalk switch remains in its end position
and is moved back manually, or automati-
cally by steering wheel movement.
48
Short flash sequence
– Move the stalk switch up or down to
position (1) and release.
The direction indicators flash three times and
the stalk switch returns to its home position.
Switching, main and dipped beam
The ignition key must be in position II for
main beam to be switched on.
– Turn the headlamp control clockwise to
the end position, see page 46.
– Move the stalk switch towards the steer-
ing wheel to the end position (4) and
release.
Main beam flash
– Move the stalk switch gently towards the
steering wheel to position (3).
Main beam comes on until the stalk switch is
released. Main beam flash only works when
the ignition key is inserted in the ignition
switch.
Home safe lighting
Some of the exterior lighting can be kept
switched on to work as home safe lighting
after the car has been locked. The standard
1
delay is 30 seconds,
but can be changed to
60 or 90 seconds, see page 65.
1
Factory sett.
– Remove the key from the ignition switch.
– Move the stalk switch towards the steer-
ing wheel to the end position (4) and
release.
– Get out of the car and lock the door.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents