PM1D Manager for Windows Operating manual
Installing PM1D Manager
This section explains how to install the PM1D Manager program.
Before you install the software, you must read the license agreement (licence_e.txt) found on the
"PM1D SYSTEM SOFTWARE" CD-ROM. You may use the software on the CD-ROM only if you
accept the terms of this license agreement.
If an older version of PM1D Manager is already
installed, you must ﬁrst uninstall it. (For the unin-
stallation procedure, refer to p.5.)
Before you begin the installation, you must exit all
applications and memory-resident programs.
1. Insert the "PM1D SYSTEM SOFTWARE" CD-ROM
into your CD-ROM drive, and open the CD-ROM
drive from "My Computer."
The actual display will depend on your PC system.
2. Inside the "WIN" folder, double-click the "Setup"
The opening screen of the installer will appear.
Depending on your PC system, you may be asked to
restart the system during the installation process. If
so, installation will continue automatically after
3. As directed by the instructions on the screen, click
the "Next" button as needed to proceed to the next
4. When the "Select Installation Folder" screen
appears, click the Browse button if necessary, spec-
ify the installation folder, and proceed to the next