Yamaha AS2000BL Service Manual page 25

14. "M16C Flash Start" is displayed. (Fig. 5)
Click [E.P.R...], and "Erase OK?" is displayed.
(Fig. 5)
Click [OK] and start writing. (Fig. 5)
15. When writing is completed, "Program OK." is dis-
played. (Fig. 5)
Click [OK]. (Fig. 5)
16. Set the "POWER ON/OFF" switch to the OFF po-
sition.
17. Disconnect the power cable of this unit from the
AC outlet.
18. End "FlashSta. exe."
19. Disconnect the RS232C cross cable, RS232C
conversion adapter and flexible flat cable.
Writing /
When click [E.P.R...], "Erase OK?" is displayed.
When click [OK], writing is started.
Collating /
Click [OK].
Writing completed /
Fig. 5
A-S2000
25