Teac DS-H01 Owner's Manual page 7

Digital docking station
Table of Contents

Advertisement

Available languages

Available languages

A
Analog sound output jacks (LINE OUT)
These output the two channels of audio from the iPod/iPhone/iPad connected to this unit's
dock as analog signals . Connect the RCA jacks to a stereo amplifier or speakers .
Connect this unit's R jack to the R jack of the device receiving sound input and this unit's L jack
to the L jack of the receiving device .
White (L)
Red (R)
B
USB port
Set the rear panel PC SYNC USB switch to ON to use this unit as an iPod Dock, enabling the
synchronization of music files between the connected computer and the iPod/iPhone/iPad .
o Connect using a commercially available cable .
o When the PC SYNC USB switch is set to ON, no signals are output from the LINE OUT, VIDEO
OUT or DIGITAL OUT connectors .
C
VIDEO OUT connectors (S-VIDEO, VIDEO)
These output the video signal from the iPod/iPhone/iPad connected to this unit's dock . Use
these to connect to the S-VIDEO input or composite video input of a TV or monitor .
o Connect using a commercially available cable .
o When outputting the iPod/iPhone/iPad video signal, no video will appear on its display .
o If the iPod/iPhone/iPad has a TV Out menu, select On or Ask . When set to Ask, a screen will be
shown each time before a video is played back . You can then choose whether or not to have
the device output the video signal .
o To output video from the iPod/iPhone/iPad via the output jack to a TV or other display, start
playback after connecting the iPod/iPhone/iPad to this unit's dock .
D
DIGITAL OUT connectors (OPTICAL, COAXIAL)
These output sound from the iPod/iPhone/iPad connected to this unit's dock . Connect one to a
digital sound input port of another device .
COAXIAL: RCA coaxial digital cable
OPTICAL: Optical digital cable (TOS)
o Connect using a commercially available cable .
E
DC input port (DC IN 6V)
After completing all other connections, connect the included AC adapter (PS-M0630) to this
jack . Then, connect the AC adapter power cord to the adapter . Finally, connect the AC adapter
power cord plug to a power outlet .
o When not using the unit for some time, disconnect the power cord from the power outlet .
V
Use only the included AC adapter (PS-M0630) and AC adapter power cord .
White (L)
Red (R)
7

Advertisement

Table of Contents
loading

Table of Contents