Remote Control - Pioneer Elite A-20 Operating Instructions Manual

03 Controls and displays

Remote control

1
2
3 3
4
3 3
3 3
10
En
1  STANDBY/ON
Switches the amplifier between standby and on.
2 Input selector buttons
Press to select an input source. These select the
component connected to the corresponding input on the
5
rear panel.
3 NETWORK AUDIO PLAYER control
buttons
6
Use to control Pioneer network audio player.
7
4 SACD PLAYER control buttons
Use to control Pioneer SACD player.
8
(Cannot be used to perform playback/pause on the
PD-D6/PD-D6MK2/PD-D9/PD-D9MK2 models.)
9
5 DIMMER
This button allows the illumination of the unit's front
panel indicators to be set in three levels (does not affect
10
the STANDBY indicator).
6 LOUDNESS
Use to set the loudness circuit ON/OFF (page 8).
11
7 DIRECT
Press to access Direct listening (page 8).
8 SPEAKERS A button/indicator
Use this button to listen to the speaker system
4
connected to SPEAKERS A terminals.
9 SPEAKERS B button/indicator
Use this button to listen to the speaker system
connected to SPEAKERS B terminals.
10 MUTE
Mutes/unmutes the sound.
11 VOLUME +/–
Use to set the listening volume.