Adaptive
NAPCO's
Microwave/PIR Detectors
continuously adjust
environment, providing
(45.4kg) pet/animal immunity
and
ultimate reliability
alarm protection
Upon installation, a NAPCO Adaptive
Microwave/PIR
Detector
initialized in the first of its 12 senstivity
modes, i.e., the most sensitive, enabling
it to sample prevailing environmental
conditions.
Faced
with
tranquility,
the
Adaptive
automatically selects the most appropriate
detection mode accordingly, optimizing
both intruder catch and stability. Each time
the sensors detect a stimulus stong enough
to generate a signal, but insufficient in
strength to indicate an alarm, the detector
will automatically change sensitivity modes,
effectively widening the gap between the
detected signal and its alarm threshold.
Therefore, environmental disturbances,
those that register by the PIR and/or
microwave sensor, are better tolerated and
the threat of false alarms or nuisance alarms
is dramatically reduced, far surpassing
the performance of conventional dual
technology devices.
Napco Adaptive® C200AP also includes
P.E.T. ™, profile enhanced targeting
circuitry and Vari-Pet optics, to provide
the ultimate pet/animal protection, for up
Manufacturing great security products is all we do.
C200AP
Dual
®
to their
to 100lb. (45.36kg) pet immunity! And,
powers
up,
most-importantly, because a dynamic
Adaptive Detector literally adjusts to its
surroundings minute-by-minute, once the
pet vacates or other nuisance disturbances
hostility
or
abate, e.g., the space heater turns off
detector
again, the air conditioner stops blowing
the blinds, power stops browning-out,
-- this intelligent detector again elevates
its sensitivity, mode by mode—so the
premises always enjoys the greatest level
of fast intruder-catch detection and false
alarm protection possible.
The most forgiving sensor to install
available, Adaptive Sensors are so smart
and make the sensitivity and critical
range adjustments an experienced alarm
professional would, if one were standing
by, 24-hours a day, seven days a week to
make them. Any activity beyond the unit's
protected area, detected by the microwave
section is also automatically compensated
for. The unit even actively tests both its
channels (PIR and Microwave), regulary
activating each, to make sure it is on-the-
job, performing to specification.
100lb.
& false
standard
wide angle
lens
It's that simple.
™
Need help?
Do you have a question about the C 200 AP and is the answer not in the manual?
Questions and answers