Related Manuals for Esu LokSound micro
Summarization of Contents
Installation of LokSound Decoders
Connecting LokSound Decoders in N, TT, HO, 0 Gauge Models
Instructions for connecting decoders in smaller model scales.
Installation Requirements
Ensures the locomotive is in good mechanical condition before digital conversion.
Connecting the LokSoundXL Decoder
General Hints for LokSoundXL
Important precautions and general advice for LokSoundXL installation.
LokSoundXL Wiring Diagram
Visual guide for wiring the LokSoundXL decoder.
Auxiliary Function Outputs
Auxiliary Function Outputs Overview
Explains the 8 function outputs and their uses.
Connecting Headlights
Wiring instructions for headlights and backup lights.
Connecting Auxiliary Functions
Connecting various devices to auxiliary function outputs.
Connecting a Wheel Sensor
How to connect sensors for chuff synchronization.
Connecting a Reed Contact with Magnet
Wiring reed contacts for sensor input.
Connecting a Mechanical Contact
Wiring mechanical contacts for sensor input.
Set Up and Installation of the Decoder
Analogue Operation
How to operate the decoder in analogue mode.
Digital Operation
How to operate the decoder with digital systems.
Resetting to Factory Pre-set Values
How to reset decoder parameters to default settings.
Adjusting Decoder Parameters
CVs of LokSound Decoders
Explanation of Configuration Variables (CVs) and their use.
Important Settings of LokSound
Key CVs and their impact on decoder performance.
Need help?
Do you have a question about the LokSound micro and is the answer not in the manual?
Questions and answers