HP StorageWorks 64 - SAN Director Switch Planning Manual page 125

The LAN interface can be:
■
Note:
Mbps connection. Depending on speed restrictions imposed by other LAN-attached
devices, the LAN segment that connects the HAFM server to managed directors and
switches operates at either 10 or 100 Mbps.
SAN High Availability Planning Guide
Part of the customer's public 10/100 Mbps LAN segment that provides access
to managed directors and switches. This product-to-HAFM server Ethernet
connection is part of the equipment rack installation and is required.
Connection of remote workstations through the hub is optional. This type of
network configuration using one Ethernet connection through the HAFM
server is shown in Figure 48
example.
This single Ethernet connection is supported by HP, is Open View-Storage
Node Manager (OV-SNM) compatible, and is the recommended configuration
for a typical HP installation at a customer site. LAN security is provided by
restricting password access and disabling the SNMP agent, embedded Web
server interface, and command line interface (Telnet access) for each managed
director or switch.
The Ethernet adapter in the HAFM server provides an auto-detecting 10/100
on page 126. Director 2/64s are used as an
Physical Planning Considerations
125