Listening To The Radio; Line In Connection; Specifications - RCA Ri383 User Manual

Portable speaker system for ipod and iphone
Hide thumbs Also See for Ri383:
Table of Contents

Advertisement

Available languages

Available languages

Note:
• If your iPhone is called while it is docked, playback will be paused.
• When AC-powered (except when in Tuner mode), the iPod / iPhone will charge automatically (until
fully charged) once it is docked in the cradle.
• When the Line-in cable is connected, you cannot play iPod / iPhone.
Installing an iPod / iPhone
1. Press the Fn (FUNCTION) button to switch to iPod / iPhone mode (blue indicator will be on when iPod /
iPhone mode is selected).
2. Insert your iPod / iPhone into the dock until it sits firmly in place.
Rotating Your iPod / iPhone horizontally
1. Make sure your iPod / iPhone is firmly positioned into the connector.
2. Hold the lower part (under the iPod) of the dock, then slowly rotate the cabinet to 90
anticlockwise.
Note: You can also rotate the dock first, and then install your iPod / iPhone into the iPod / iPhone
cradle. Rotating your iPod / iPhone by holding its dock is not recommended.

Listening to the Radio

In tuner mode, only FM band is available on this unit.
1. Press the
button to turn the unit on.
2. Press the Fn (FUNCTION) button to switch to TUNER mode (red indicator will be on when
Radio mode is selected).
3. Press the TUNING knob to tune in to a station.
4. Adjust the volume level.

LINE IN Connection

Connecting to LINE IN for Other Sound Sources
In iPod / iPhone mode, you can connect audio devices such as your CD player or MP3 player to the
unit through the 3.5mm LINE IN jack. Use a line-in cable (not supplied) to connect the LINE IN jack
on the back cabinet to the line out or earphone jack of the other audio devices.
Note:
When the Line-in cable is connected, you cannot play iPod / iPhone.
Listening to the Connected Device
1. Press the Fn (FUNCTION) button to switch to iPod / iPhone mode.
2. Turn on the audio device you have attached to the LINE IN jack.

Specifications

DC: 9V
1.5A external DC supply or 6 x AA size batteries
Design and specifications are subject to change without notice.
EN - 5
direction
o

Advertisement

Table of Contents
loading

Table of Contents