Summary of Contents for Russound LFP-1.2
- Page 1 LFP-1.2 Low Frequency Protection Circuit Instruction Manual INPUT OUTPUT L+ L- R- R+ L+ L- R- R+ RUSSOUND INC LFP-1.2 LOW FREQ PROTECTION...
- Page 2 Connect the left and right audio outputs of the amplifier or receiver to the detachable input connector of the LFP-1.2. Connect the detachable output connector of the LFP-1.2 to the input of the impedance-matching system as seen in Figure 1. Be careful to keep channel identity and polarity consistent when making connections.
- Page 3 Mounting Mount the LFP-1.2 using the two mounting brackets. Be sure that the bottom of the circuit does not rest against the mounting surface. See Figure 2. Figure 2 Technical Information Power: 100 W/ch RMS continuous 200 W/ch average 300 W/ch peak...
- Page 4 Limited Warranty The Russound LFP-1.2 is fully guaranteed for Ten (10) years from the date of purchase against all defects in materials and workmanship. During this period Russound will replace any defective parts and correct any defect in workmanship without charge for either parts or labor.