Picking Up Spills; After Cleaning - Hoover F7411900 - SteamVac Dual-V Wide Path Deep Carpet Cleaner Owner's Manual

piCkinG up spills

Your HOOVER ® SteamVac
used to pick up small liquid spills on carpet or
uholstery.
For best results, pick up spills immediately by
placing the stair/upholstery nozzle just above the
spill and suction up any residue on top of the carpet.
If the spill remains, place either the stair/ upholstery
nozzle or floor nozzle with the SpinScrub
selector to SPILL PICK-UP in front of the spill, pull
the nozzle very slowly over the spill initially with
suction only. Repeat with spray and suction.
If a spot is left, the stair/upholstery nozzle is
generally more effective for removing it. Although no

after CleaninG

Allow carpet or upholstery to dry. To help prevent
matting and resoiling the carpet, keep children and
pets away from surface until it is completely dry. If it
is necessary to walk on damp carpet, place towels
or white cloths on the traffic areas.
If furniture must be replaced before the carpet is dry,
place plastic or aluminum foil under legs of furniture
so metal slides or wood finishes will not stain the
carpet.
Empty tanks, rinse with clean water and let air dry.
Rinse the Dirty Water Tank lid and let air dry.
3.4 Remove lint from filter screen located inside
Dirty Water Tank.
3.5 Remove lint from filter screen located on bottom
of cleaner.
IMPORTANT
When brushes seem to be rotating slowly,
disconnect cleaner from electical outlet and
check and clean this screen.
Actual model may vary from images shown.
® cleaner may also be
®
mode
cleaning solution can completely remove all spots,
they can be treated by following the instructions
provided by the manufacturer of the carpet,
upholstery, or hard floor surface being cleaned.
Do not use the SteamVac
flammable or combustible liquids or chemicals.
When finished, follow "After Cleaning" instructions.
3.4
12
®
cleaner to pick up
3.5