Command Examples; Notes, Cautions, And Warnings; Key Terms - Brocade Communications Systems 8 Troubleshooting And Diagnostics Manual

...
value
|

Command examples

This book describes how to perform configuration tasks using the Fabric OS command line
interface, but does not describe the commands in detail. For complete descriptions of all Fabric OS
commands, including syntax, operand description, and sample output, see the Fabric OS
Command Reference.

Notes, cautions, and warnings

The following notices and statements are used in this manual. They are listed below in order of
increasing severity of potential hazards.
NOTE
A note provides a tip, guidance or advice, emphasizes important information, or provides a reference
to related information.
ATTENTION
An Attention statement indicates potential damage to hardware or data.
CAUTION
A Caution statement alerts you to situations that can be potentially hazardous to you or cause
damage to hardware, firmware, software, or data.
DANGER
A Danger statement indicates conditions or situations that can be potentially lethal or extremely
hazardous to you. Safety labels are also attached directly to products to warn of these conditions
or situations.

Key terms

For definitions specific to Brocade and Fibre Channel, see the Brocade Glossary.
For definitions of SAN-specific terms, visit the Storage Networking Industry Association online
dictionary
xii
Repeat the previous element, for example "member[;member...]"
Fixed values following arguments are printed in plain font. For example,
show WWN
--
Boolean. Elements are exclusive. Example:
at:
http://www.snia.org/education/dictionary
show mode egress | ingress
-- -
Fabric OS Troubleshooting and Diagnostics Guide
53-1001769-01