HP 3000 - 37XE System Reference page 17

3.3 Data-in-place (hardware) upgrade support for EVA controllers
This table shows data-in-place upgrade support for when you upgrade the hardware. A bullet (•) indicates you can perform a data-in-place upgrade from the array controller in the FROM column to the
array controller in the TO column. A blank cell indicates a data-in-place upgrade is not supported.
NOTE: When doing a data-in-place upgrade, the old and new controllers must be running the same version of controller software. A data-in-place upgrade must be performed offline.
EVA3000
(HSV100)
FROM array controller
EVA3000 (HSV100)
EVA5000 (HSV110)
EVA4000/6000 (HSV200)
EVA4100/6100 (HSV200-A)
EVA8000 (HSV210)
EVA8100 (HSV210-A)
EVA4400 (HSV300)
EVA4400 (HSV300-S)
EVA6400 (HSV400)
EVA8400 (HSV450)
P6300 EVA (HSV340)
P6500 EVA (HSV360)
1
Includes EVA8400 HSV450 controller variations (14 GB cache and 22 GB cache).
2
Includes FC, iSCSI, and iSCSI/FCoE controller variations.
EVA5000 EVA4100/6100 EVA8100
(HSV110) (HSV200-A) (HVS210-A)
• •
•
•
•
TO array controller
EVA4400 EVA4400
(HSV300) (HSV300-S)
•
•
•
•
•
•
•
EVA8400 P6300 EVA
EVA6400
(HSV400) 1
(HSV450) (HSV340)
• •
• •
•
•
P6500 EVA
2 2
(HSV360)
•
•
17