Sfp Class Default Settings; Table 8 Sfp Class Default Settings - Brocade Communications Systems 8 Administrator's Manual

6
SFP monitoring guidelines and default settings

SFP class default settings

Table 8
TABLE 8
Area
Current
Receive Power
Supply Voltage
Temperature
Transmit Power
SFP State
Changes
48
provides default settings for areas in the SFP class.
SFP class default settings
Description
Monitors SFP current
Monitors receive
power in µWatts
Monitors SFP
electrical force in volts
Monitors SFP
Temperature
Monitors transmit
power in µWatts
Monitors the insertion
and removal of SFPs
Default threshold settings Default alarm settings Threshold state
Unit: mA Changed: 0
Time Base: none Below: 1
Low: 0 Above: 1
High: 50 In-Between: 0
Buffer: 1
Unit: µWatts Changed: 0
Time Base: none Below: 1
Low: 0 Above: 1
High: 5000 In-Between: 0
Buffer: 25
Unit: mV Changed: 0
Time Base: none Below: 1
Low: 2970 Above: 1
High: 3630 In-Between: 0
Buffer: 10
Unit: Degrees C Changed: 0
Time Base: none Below: 1
Low: -10 Above: 1
High: 85 In-Between: 1
Buffer: 3
Unit: µWatts Changed: 0
Time Base: none Below: 1
Low: 0 Above: 1
High: 5000 In-Between: 0
Buffer: 25
Unit: Changes Changed: 0
Time Base: none Below: 0
Low: 0 Above: 0
High: 0 In-Between: 0
Buffer: 0
Informative
Out_of_range
Out_of_range
Informative
Informative
Out_of_range
Out_of_range
Informative
Informative
Out_of_range
Out_of_range
Informative
Informative
Out_of_range
Out_of_range
Normal
Informative
Out_of_range
Out_of_range
Normal
Informative
Informative
Informative
Informative
Fabric Watch Administrator's Guide
53-1001770-01