Figure 21 Information Dialog Box; Figure 22 Fabric Id Selector - Brocade Communications Systems 8 Administrator's Manual

4
Creating a configuration backup file
An info link is enabled when USB is chosen as the source of the configuration file. If you click on
info, the following information message displays
FIGURE 21
To create a configuration backup file, perform the following task.
1. Open the Switch Administration window.
2. Select Show Advanced Mode.
3. Select the Configure tab.
4. Select the Upload/Download tab.
5. Enter the configuration file with a fully-qualified path, or select the configuration file name in
6. Use the Fabric ID selector to select the fabric ID of the logical switch from which the
NOTE
If you are using a USB device, it must be connected and mounted before you upload or download.
Refer to
7.
62
DRAFT: BROCADE CONFIDENTIAL
Information dialog box
The Configure screen displays.
The Upload/Download configuration screen displays
NOTE
By default, Config Upload is chosen under Function, and Network is chosen as the source of
the configuration file.
the Configuration File Name field.
configuration file is to uploaded.
The selector displays all the virtual fabric IDs that have been defined, the default of 128 for the
physical switch, chassis level configuration, and all chassis and switches.
FIGURE 22
Fabric ID selector
"Uploading and downloading from USB storage"
Click Apply.
You can monitor the progress by watching the Upload/Download Progress bar.
(Figure 21).
(Figure 20).
on page 65 for more information.
Web Tools Administrator's Guide
53-1001772-01