Logging In - Brocade Communications Systems 8 Administrator's Manual

Logging in

When you use Web Tools, you must log in before you can view or modify any switch information.
This section describes the login process.
Prior to displaying the login window, Web Tools displays a security banner (if one is configured for
your switch), that you must accept before logging in. The security banner displays every time you
access the switch.
When you are presented with the login screen you must provide a user name and a password. Your
home Admin Domain is automatically selected. You can select to log in to an Admin Domain other
than your home domain.
NOTE
You must login before you can view Switch Explorer (shown in
Use this procedure to log in to the Admin Domain.
1. Click Run on the signed certificate applet.
2. Click OK in the security banner window, if one displays.
3. In the login dialog box, enter your user name and password.
Logging in to a Virtual Fabric
If you are logging in to a platform that is capable of supporting Virtual Fabrics, the login dialog box
provides the option of logging in to a virtual fabric. The following platforms support virtual fabrics:
•
•
•
Use the following procedure to log in to a Virtual Fabric.
Web Tools Administrator's Guide
53-1001772-01
DRAFT: BROCADE CONFIDENTIAL
A warning dialog box may display. If you select the check box Always trust content from this
publisher, the warning dialog box is not displayed when you open Web Tools again.
If your current password has expired, you must also provide a new password and confirm the
new password.
Brocade DCX and DCX-4S
Brocade 5300
Brocade 5100
Opening Web Tools
Figure 3 on page 10).
1
11