Portdebug - Brocade Communications Systems 8 Command Reference Manual

portDebug

Sets debug level and verbose level of port modules.
Synopsis portdebug dbg_lvl, vbs_lvl
Description Use this command to set the debug level and verbose level of port modules.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following operands:
dbg_lvl
vbs_lvl
Examples To set debug level and verbose level of port modules:
See Also dbgShow
Fabric OS Command Reference
53-1001764-02
Specify the debug level to be set for port modules; valid values are 1 to 5.
Specify the verbose level to be set for port modules; valid values are 1 to 5.
switch:admin> portdebug 3 4
2
portDebug
699