Fabretryshow - Brocade Communications Systems 8 Command Reference Manual

2

fabRetryShow

fabRetryShow
Displays the retry count of the fabric commands.
Synopsis fabretryshow
Description Use this command to display the retry count of the fabric commands. The SW_ISL (ISL ports)
information displays the retry count for the following fabric commands:
ELP
EFP
HA_EFP
DIA
RDI
BF
FWD
EMT
ETP
RAID
GAID
ELP_TMR
GRE
ECP
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands none
Examples To display the retry count of Fabric OS commands:
See Also fabricLog
232
Exchange Link Parameters
Exchange Fabric Parameters
Exchange Fabric Parameters used during warm recovery
Domain Identifier Assigned
Request Domain Identifier
Build Fabric
Fabric Controller Forward
Fabric Controller Mark Timestamp
Fabric Controller Trunk Parameters
Return Address Identifier
Get Address Identifier
Used internally for fabric application (not a SW_ISL)
Get Route Entry
Exchange Credit Parameters
switch:user> fabretryshow
SW_ILS
E_Port ELP EFP HA_EFP DIA
16 0 0 0 0
17 0 0 0
RDI BF FWD EMT
0 0 0 0 0
0 0 0 0 0
ETP RAID GAID ELP_TMR GRE
0 0 0 0
0 0 0 0
Fabric OS Command Reference
53-1001764-02
ECP
0
0 0