Errdelimiterset - Brocade Communications Systems 8 Command Reference Manual

errDelimiterSet

Sets the error log start and end delimiters for messages sent to the console and syslog.
Synopsis errdelimiterset [-s "start delimiter string"][-e "end delimiter string"]
Description Use this command to set the error log start and end delimiters for log messages sent to the console
and syslog. An empty string clears the start and the end delimiters (including the colon) so that they
are not displayed.
If no arguments are supplied to the command, it instead displays the existing errDelimiterSet
configuration. These delimiters are stored persistently.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following operands:
-s "start delimiter string"
-e "end delimiter string"
Examples To display the start and end delimiters:
To change the start and end delimiters (with sample output):
See Also errDump, errFilterSet, errShow
Fabric OS Command Reference
53-1001764-02
Specify the alphanumeric string for the start delimiter; up to 10 characters
are allowed. This operand is optional.
Specify the alphanumeric string for the end delimiter; up to 10 characters are
allowed. This operand is optional.
switch:admin> errdelimiterset
delimiter start string: <none>
delimiter end string: <none>
switch:admin> errdelimiterset -s "Start" -e "End"
Start2003/03/10-09:54:03, [NS-1002], 1035,, ERROR, SWITCH43, Name Server
received an invalid request from device 10:02:32:A3:78:23:23:End
2
errDelimiterSet
221