Zonedelete - Brocade Communications Systems 8 Command Reference Manual

2

zoneDelete

zoneDelete
Deletes a zone.
Synopsis zonedelete "zonename"
Description Use this command to delete a zone.
This command changes the defined configuration. For the change to be preserved across switch
reboots, save the configuration to nonvolatile memory using the cfgSave command. For the change
to become effective, enable the configuration with the cfgEnable command.
Notes The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command
Availability" for details.
When an FCS policy is enabled, this command can be issued only from the primary FCS switch.
Operands The following operand is required:
"zonename"
Examples To delete the zone "Blue_zone":
See Also zoneAdd, zoneCreate, zoneRemove, zoneShow
1020
Specify the name of the zone to be deleted. Quotation marks are optional.
switch:admin> zonedelete "Blue_zone"
Fabric OS Command Reference
53-1001764-02