Upth System Messages - Brocade Communications Systems 8 Reference

UPTH System Messages

UPTH-1001
Message
<timestamp>, [UPTH-1001], <sequence-number>,, WARNING, <system-name>, No minimum
cost path in candidate list.
Probable Cause Indicates the specified switch is unreachable because no minimum cost path (FSPF UPATH) exists
in the candidate list (domain ID list).
Recommended No action is required. This will end the current SPF computation.
Action
Severity WARNING
UPTH-1002
Message
<timestamp>, [UPTH-1002], <sequence-number>,, WARNING, <system-name>, Domain
<domain ID> is unreachable because the enabled TI zone is not compatible with the
fabric configuration.
Probable Cause Indicates the specified switch is unreachable because of the TI zone and the fabric configuration
incompatibility.
Recommended Clear all TI zones and refer to the TI zone user manual for instructions on how to create a valid TI
Action zone for your fabric configuration.
Severity WARNING
Fabric OS Message Reference
53-1001767-01
Chapter
106
645