Lsdb System Messages - Brocade Communications Systems 8 Reference

Fabric os message reference
Hide thumbs Also See for 8:
Table of Contents

Advertisement

LSDB System Messages

LSDB-1001
Message
<timestamp>, [LSDB-1001], <sequence-number>,, ERROR, <system-name>, Link State ID
<link state ID>
Probable Cause
Indicates the specified link state database ID is out of the acceptable range. The valid link state ID
is the same as the valid domain ID, whose range is from 1 through 239. The switch will discard the
record because it is not supported.
Recommended
No action is required.
Action
Severity
ERROR
LSDB-1002
Message
<timestamp>, [LSDB-1002], <sequence-number>,, INFO, <system-name>, Local Link
State Record reached max incarnation#
Probable Cause
Indicates the local link state database reached the maximum incarnations.
An "incarnation" is a progressive number that identifies the most recent version of the LSR (link
state record). The switch generates its local link state record when first enabled. The incarnation
number will begin again at 0x80000001 after reaching 0x7FFFFFFF.
Recommended
No action is required.
Action
Severity
INFO
LSDB-1003
Message
<timestamp>, [LSDB-1003], <sequence-number>, FFDC, CRITICAL, <system-name>, No
database entry for local Link State Record, domain
Probable Cause
Indicates there is no local link state record entry in the link state database. The switch should
always generate its own local entry when starting up.
An "incarnation" is a progressive number that identifies the most recent version of the LSR (link
state record). The switch generates its local link state record when first enabled. By disabling and
enabling the switch, a new local link state record is generated.
Recommended
Run the switchDisable and switchEnable commands. A new local link state record is generated
Action
during the switch enable.
Fabric OS Message Reference
53-1001767-01
out of range
<local domain>
Chapter
65
427

Advertisement

Table of Contents
loading

Table of Contents