Fw System Messages - Brocade Communications Systems 8 Reference

Fabric os message reference

Hide thumbs Also See for 8:

Table of Contents

FW System Messages

<timestamp>, [FW-1001], <sequence-number>,, INFO, <system-name>, <label>, value

has changed(High=<High value>, Low=<Low value>). Current value is <Value> <Unit>.

Probable Cause

Indicates that the internal temperature of the switch has changed.

No action is required. Respond to this message as is appropriate to the particular policy of the

end-user installation. To prevent recurring messages, disable the changed alarm for this threshold.

<timestamp>, [FW-1002], <sequence-number>,, WARNING, <system-name>, <Label>, is

below low boundary (High=<High value>, Low=<Low value>). Current value is <Value>

Probable Cause

Indicates that the internal temperature of the switch has fallen below the low boundary.

No action is required. Respond to this message as is appropriate to the particular policy of the

end-user installation. Typically, low temperatures means that the fans and airflow of a switch are

functioning normally.

Verify that the location temperature is within the operational range of the switch. Refer to the

hardware reference manual for the environmental temperature range of your switch.

<timestamp>, [FW-1003], <sequence-number>,, WARNING, <system-name>, <Label>, is

above high boundary(High=<High value>, Low=<Low value>). Current value is <Value>

Probable Cause

Indicates that the internal temperature of the switch has risen above the high boundary to a value

that might damage the switch.

This message generally appears when a fan fails. If so, a fan failure message accompanies this

message. Replace the fan field-replaceable unit (FRU).

Fabric OS Message Reference

53-1001767-01

Table of Contents