Advertisement
SSC-1000 (gb)
2009.1.8
1:38 PM
User's Guide
# TOUR action
#
This is a function for putting out the Tour Switching program set up in
the matrix switcher on the monitor of your discretion.
First, select the monitor you intend to put out, and when you press
TOUR+NO.+ENTER, the visuals corresponded to the pertinent
Tour program get automatically converted, "TOUR [NO] RUN" get
indicated in the LCD.
If you press Hold in the tour run state, the automatic conversion actions
get stopped, and "TOUR [NO] HOLD" gets indicated in the LCD.
If you press the NEXT or BEFORE button in this state, it gets
converted to the next visuals or the previous visuals of the visuals being
put out presently.
If you want to automatically convert again, press the SEQUENCE
button. If you want to convert the tour mode to the manual select mode,
press CAM+NO.+ENTER.
$ SALVO action
$
This is a function for showing camera visuals corresponded to monitor
groups in the Salvo program of the matrix switcher to corresponding
monitors simultaneously.
If you want to select the monitor group salvo that you desire,
press SALVO+NO.+ENTER.
At this time "SALVO [NO]" gets indicated in the LCD.
In this state, if you press Next or Before, it gets converted to the
next Salvo No. or the previous Salvo No. All Salvo No modes get
consecutively converted and "SALVO [NO] RUN" gets indicated
in the LCD. In this state, if you press Hold, it gets fixed to the previous
Salvo No mode.
For conversion to the manual select mode, press CAM+NO.+ENTER.
Page 20
20
5) Manipulating the MULTIPLEX
! Into the multiplex control mode
You get into the multiplex control mode by pressing "MUX CONTROL"
button.
@ How to control "MONITOR OUT"
You can control "MONITOR OUT" by pressing "MON" button in the
Multiplex control mode and selecting a RS-485 Address value (an odd
among 1~253) of the multiplex and pressing "Enter" button. One to one
with front panel of the multiplex.
(Refer to the 2.Names and Functions of Each Parts)
# How to control "SPOT OUT"
You can control "SPOT OUT" by pressing "MON" button in the
Multiplex control mode and selecting a RS-485 Address value+1 (even
among 2~254) and pressing "Enter" button.
- "1~16" + "ENTER" : Fixed output of the channel selected.
- When you press "HOLD(SEQUENCE)" button, switching screen
output. (Switching output according to "SPOT OUT" setup in the
Multiplex menu)
$ How to escape from the Multiplex control mode.
- When you press "MUX CONTROL" button, you escape from the
multiplex control mode.
- When you press "CAM", you escape from the Multiplex control mode
and you can select an address number of the camera.
21
Hide quick links:
Advertisement
