JVC KY-F560U - 3-ccd Color Camera Instruction Manual page 15

Mounting KY-F560 Camera on this Unit (continued)
3.
Mounting bracket
Screw Ç
4.
5.
Slot
Camera mounting frame
Screw ı
Relay board
Screw Ç
3.
Place the camera on top of the camera
mounting frame and use the screw Ç pro-
vided to secure the camera to the base of
the frame.
Use the camera mounting bracket screw
hole to secure the camera.
4.
After the camera mounting frame is in-
serted into this unit, secure it by screwing
back the 2 screws ı which were taken
out earlier in above-mentioned step
Notes
● Please remove the camera lens mount
cap before hand.
● Before inserting the camera mounting
frame into this unit, turn the lens secure
lever located in front of
the camera clockwise to
move it to a lower posi-
tion. If the lever remains
at the upper position, it
may hit this unit when the
frame is being inserted.
Lever
5.
Insert this unit's relay board into the slot
at the rear of the camera and secure it by
screwing back the 2 screws Å which were
taken out earlier in above-mentioned
1.
step .
Note
Ensure that the relay board is inserted
all the way in.
2.
.
15