Password Setting - JVC C11U - VN Network Camera Instructions Manual

2-4 Other Settings with V.Networks Setup Tool [1. Password Setting]
VN-C11 is equipped with an access protection (security) function that, by setting
passwords, regulates users of the connected PC.
Setting and cancellation of passwords can be performed with [V.Networks Setup
Tool].
According to access right (authorization) levels, up to 3 passwords (user, operator and administrator)
can be set.
Access Right Level
User
Operator
Administrator
Note
Do not forget the passwords as they cannot be changed unless the current, and correct ones
are entered.
1.
Start up [V.Networks Setup Tool] and select [User], [Operator] or [Administrator].
2.
The following screen is displayed for confirmation.
Note
● For a password-protected VN-C11, the password request screen appears.
● VN-C11 cannot be set up unless the correct administrator password is entered.
● The security level is highest for the administrator and lowest for the user. If password is set
only for lower security level(s), password protection is not effective.
Only viewing moving images
All operations with [V.Networks Controller]
All of the above and all settings with [V.Networks Setup Tool]
Allowed Actions
Enter a password to set password protec-
tion or change the password. Entered char-
acters are displayed as asterisks (*).
• Enter the same password for both boxes.
• A password must be alphanumeric and
can be up to 8 characters.
Note
To cancel an existing password,
leave the password entry box blank
and click
Click
Click .
.
.
27