Motion Detect - D-Link DCS-942L User Manual

Section 4 - Configuration
Enabling Video Motion will allow your camera to use the motion detection feature. You may draw a finite motion area that will be used for monitoring.
Enable Video Check this box to enable the motion detection
Motion:
feature of your camera.
Enable PIR: When this option is selected, use PIR (passive
infrared) to detect motion.
Sensitivity:
Specifies the measurable difference between two
sequential images that would indicate motion.
Please enter a value between 0 and 100.
Drawing Mode: Select Draw Motion Area to select the area of
the picture to monitor for movement to trigger
recording or snapshot. Use your mouse to click
on the blocks that you would like to monitor for
motion. Select Erase Motion Area to remove the
blocks and stop the camera from monitoring that
area of the picture.
Clear:
Clears all motion detection areas from the picture.
Refresh Image: Updates the image with a new one at the time the
button is pressed.
Click Save Settings to save your changes.
D-Link DCS-942L User Manual

Motion Detect

37