HP GbE2c - Blc Layer 2/3 Fiber SFP Option Setup Poster
Bladesystem c-class solution overview setup poster
Hide thumbs
Also See for GbE2c - Blc Layer 2/3 Fiber SFP Option:
- Interface manual (209 pages) ,
- Command reference manual (175 pages) ,
- Application manual (165 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Cli Reference Manual
HP BladeSystem c-Class
Solution Overview
Setup Poster
Intended audience
This document is for the person who installs, administers, and troubleshoots HP BladeSystem
c-Class products. Only persons experienced in server blade technology and configuration
should attempt these procedures. HP assumes you are qualified in the servicing of computer
equipment and trained in recognizing hazards in products with hazardous energy levels.
Legal notices
© Copyright 2006, 2008 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The only warranties for
HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional
warranty. HP shall not be liable for technical or editorial errors or omissions contained
herein.
Microsoft and Windows are U.S. registered trademarks of Microsoft Corporation.
Part Number 413339-005
September 2008 (Fifth Edition)
Advertisement
Table of Contents
Related Manuals for HP GbE2c - Blc Layer 2/3 Fiber SFP Option
Summary of Contents for HP GbE2c - Blc Layer 2/3 Fiber SFP Option
- Page 1 Legal notices © Copyright 2006, 2008 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services.
-
Page 2: Before You Begin
Document overview This document provides an overview of the complete installation process of an HP BladeSystem c-Class solution. In this document, the term "blade" can include server blades, storage blades, or workstation blades. Before you begin A. Research and develop a solution To begin researching the HP BladeSystem solution, see the HP BladeSystem technical resources website (http://www.hp.com/go/bladesystem/documentation). -
Page 3: Determine Power And Cooling Configurations
The following items are available on the HP Bladesystem documentation • website (http://www.hp.com/go/bladesystem/documentation): Useful links to BladeSystem technical information like Quick Specs and Customer advisories The installation checklist, used to collect information needed for installation and configuration User documentation, such as user guides, quick install cards, and troubleshooting information Copies of all the material included with the enclosure Numerous white papers and technical briefs on various BladeSystem... -
Page 4: Install The Components
B. Install the components Before installing front or rear components into the enclosure, review enclosure bay numbering for each component. Install any options, such as processor, memory, mezzanine card, or hard drive, into each blade. Based on the total number ordered and the planned configuration, install the following components: •... -
Page 5: Enclosure Configuration
Enclosure configuration A. Run the Insight Display wizard When the enclosure is powered up for the first time, the HP BladeSystem Insight Display launches an installation wizard to guide the rack technician through the initial configuration process. Be sure to have the Installation Checklist available to record important information, such as the Onboard Administrator IP address, gathered while running the installation wizard. -
Page 6: Firmware Management
Interconnect module configuration Each interconnect module ships with a default configuration. For customized configuration or advanced port mapping, see the installation instructions that ship with each interconnect module. To configure HP Virtual Connect modules, see the HP Virtual Connect for c-Class BladeSystem User Guide on the HP website (http://www.hp.com/go/bladesystem/documentation). -
Page 7: Management Software
Use iLO Virtual CD/DVD-ROM to install the operating system from a • CD/DVD-ROM drive on the network. For more information, see the server blade user guide and the HP Integrated Lights-Out 2 User Guide on the HP website (http://www.hp.com/servers/lights-out). Use a USB DVD-ROM drive and a local I/O cable to install the operating •... -
Page 8: Troubleshooting
Essentials management software. After installation completes, log in to HP SIM using the credentials supplied during the installation process, and follow the instructions on the Getting Started pop-up to complete installation and configuration. For more information, see the HP Insight Control Management Software portfolio at the HP website (http://h18013.www1.hp.com/products/servers/management/index.html?jumpi d=servers/proliant/manage).