Changing The Rf Remote Control Code; Menu Function - RCA D770 - D 770 Universal Remote Control User Manual

Changing The RF Remote Control Code

1. Select Options in the Main menu.
2. Select System Options.
3. Select RF Remote.
4. If you normally use the SAT key on your remote to control your RCA
satellite receiver, choose a number between 000 and 255. Follow the
on-screen instructions to enter this number as your RF remote control
code. However, if you use the AUX1 or AUX2 key, choose a number
between 000 and 099.
Then, to change the code on your remote to match the satellite receiver,
perform the following:
1. Press and hold the SAT key, AUX1, or AUX2 key (depending on
which key you use to control your satellite receiver).
2. Then use the Digit keys to enter the same RF remote control
code (000-255 for SAT), or (000-099 for AUX1 or AUX2) on your
remote control.

Menu Function

The Menu function is used to make changes in the selected settings,
such as setting color, channels, timer, etc. The MENU key displays TV,
DVD player, and DBS menu screens on your TV. Each Menu function
will vary from brand to brand.
ENTERING THE MENU MODE
1. Push the component key on the
remote for the desired menu screen.
2. Push the MENU key. This allows you
to view the menu of the chosen
component. The menu should
now be visible on your television.
Note: With some brands you may have to press
the GUIDE or INFO key for the on-screen menu.
3. While in MENU Mode, these
keys will function as follows:
Navigation LEFT/RIGHT keys will
operate as cursor right and left.
Navigation UP/DOWN keys will
operate as cursor up and down.
MENU or OK key applies the
highlighted menu item.
Not all functions in all models and
brands of equipment may be fully supported.
EXITING THE MENU MODE
To exit the MENU Mode and clear the
screen on your TV, push the CLEAR key.
(Continued)
(BLINK)
OR
9