Cautions For Disassembling The Product - LG GR-K192AF Service Manual

Cautions for disassembling the product

Chapter 10. Cautions for disassembling the product
10-1. PWB (PCB) assembly, main
• When disassembling the PWB (PCB) assembly, main
located in the mechanical room, be careful so that the
lead wires do not touch the edge part.
• If the lead wire coating is disconnected or the coating is
damaged, it can cause a short circuit.
10-2. Frame assembly, display
• First left and right Doco case remove. And using the -
driver, open the slot between the frame display and the
case-U to disassemble the unit. At this time, be careful
not to apply too much pressure to damage the PWB
(PCB) assembly, display or make scratches on frame
display and case-U.
g Depending on the mode, the service slot is on the top
left or right side.
Frame Display
Deco, Case
- 52 -
Case-U