Sealed Burner Configurations; Burner Rings; Burner Igniters - Electrolux E36GF76GPS Use And Care Manual

12
Cooktop Features
SEALED BURNER CONFIGURATION
On ICON all-gas ranges, there are a total of four (4) or six (6) burners, all rated with
a maximum of 15K btu. Additionally, all burners are equipped with a slow simmer
setting rated at 620 btu.
On ICON 36" all-gas ranges (Model EGF76GPS), there is a central griddle rated at
18.5K btu. The same 15K btu top burners are equipped with the low simmer
settings of 620 btu on this model.
BURNER BASE, HEAD & CAPS
The burner heads spread the flame evenly around the burner perimeters. The
burner heads must seat properly in the burner bases to enable proper cooktop
operation. To ensure proper seating, the burner heads are keyed using a hole
which aligns with the ignitor.

BURNER IGNITERS

A burner igniter is located on each gas burner base. When a control knob is
rotated more than 90 degrees counterclockwise, the igniter will spark and the
selected burner will ignite. Additionally, due to the automatic re-ignition feature, the
igniters will spark automatically if a flame should blow out or be severely distorted
by a draft or by a ventilation system. Burner igniters must always be kept clean and
dry to function properly. Dirty or wet igniters will result in constant sparking, even if
there is a flame present. See Figure 3.
lower cap
Figure 3.
head
upper cap
igniter