Rear/Bottom Panel - Sony LMD-2450W Operating Instructions Manual

*8 Only when an NTSC signal is input and no markers
are displayed. Not displayed when the multi display
is enabled.

Rear/Bottom Panel

4 5
qa
a a/? (power) switch
The power is turned on or off.
The monitor is turned on by pressing side ?.
b AC IN socket
Connect the supplied AC power cord.
c DC 24V IN connector
Plug the DC 24V power supply to this connector to
provide power to the monitor.
d AUDIO L/R IN connectors (phono jack)
Connect to the audio outputs of a VCR or to an audio
mixer.
e COMPOSITE IN connector (BNC)
Input connector for composite signals.
f Y/C IN connector (4-pin mini-DIN)
Input connector for Y/C signals.
g G/Y IN connector (BNC)
6 7 8 9 0
qs
*9 The signal can only be selected in the main display
(see "SUB INPUT SELECT" on page 27).
*10 When a BKM-244CC is installed, closed captions
are displayed.
1 2 3
–
qd
qf qg qh qj
Input connector for G of RGB signals and component Y
(luminance) signals.
h B/P
IN connector (BNC)
B
Input connector for B of RGB signals and P
difference) of component signals.
i R/P
IN connector (BNC)
R
Input connector for R of RGB signals and P
difference) of component signals.
j EXT SYNC IN/OUT (external sync) connectors
(BNC)
To use the external sync signal, press the function button
that EXT SYNC is assigned (F1 button at the factory
setting).
IN connector
When this unit operates on an external sync signal,
connect the reference signal from a sync generator
to this connector.
Location and Function of Parts and Controls
qk
(blue color
B
(red color
R
11