Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Shel lab SMI31
Summarization of Contents
Introduction to SMI Incubators
Read This Manual Guidance
Guidance on understanding and using the user manual for safe operation.
Safety Considerations and Requirements
Essential safety precautions, national laws, and local ordinances for unit use.
Contacting Technical Assistance
Information for reaching technical support and company contact details.
Manufacturing Warranty Information
Details on warranty coverage and online registration.
Engineering Improvements Overview
Information on ongoing product updates and potential manual discrepancies.
Reference Sensor Device Requirements
Requirements and use of a calibration reference device for temperature display accuracy.
Receiving Your SMI Incubator Unit
Inspect the Shipment Procedure
Procedure for checking the unit upon delivery for damage and completeness.
Orientation Images for SMI31
Visual guide identifying key components and features of the SMI31 incubator.
Orientation Images for SMI39
Visual guide identifying key components and features of the SMI39 incubator.
Power Panel Details
Illustration and description of the unit's power panel and fuse holder.
Recording Data Plate Information
Instructions for recording essential unit identification details for future reference.
Installation of the Incubator
Installation Procedure Checklist
A step-by-step checklist covering pre-installation, workspace setup, and initial use preparation.
Required Ambient Conditions
Specifications for ideal room temperature, humidity, and environmental factors for unit operation.
Required Clearances for Ventilation
Mandatory space requirements around the unit for proper ventilation and cooling.
Power Source Requirements
Details on voltage, amperage, grounding, circuit protection, and power cord specifications.
Lifting and Handling Guidelines
Guidelines and precautions for safely lifting and moving the heavy incubator unit.
Leveling the Unit
Instructions for installing and adjusting leveling feet for stable and safe operation.
Install the Incubator in Workspace
Procedure for placing the unit in its designated workspace.
Deionized and Distilled Water Use
Recommendations and warnings regarding water types for cleaning and potential warranty voiding.
Installation Cleaning and Disinfecting
Procedure for cleaning and disinfecting the chamber before initial use.
Shelving Installation Steps
Step-by-step guide for installing the shelves using shelf clips.
Access Port Usage and Importance
Information on the purpose and proper use of the chamber access port.
Controls Overview
Over Temperature Limit System (OTL)
Explanation of the safety feature designed to prevent excessive chamber heating.
Power Switch and Indicators
Description of the main power switch and the Power On indicator light.
Temperature Setpoint Controls
How to use arrow buttons to set and adjust the chamber temperature setpoint.
Incubator Operation
Theory of Operation
Explanation of how the incubator heats, circulates air, and its OTL system functions.
Put the Incubator into Operation
Step-by-step instructions for initial setup and startup of the incubator.
Set the Temperature Setpoint
Detailed procedure for adjusting the desired chamber temperature.
Set the Over Temperature Limit (OTL)
Procedure for configuring the Over Temperature Limit safety feature.
Loading Samples Recommendations
Recommendations for placing samples in the chamber for optimal airflow and stability.
Chamber Accessory Power Outlets
Information on the internal power outlets and limitations for accessory use.
Humidifying the Incubator
Considerations for managing humidity, water containers, and potential effects on the unit.
Condensation and Dew Point Management
Explanation of condensation causes, effects, and methods for managing humidity levels.
User Maintenance Procedures
Cleaning and Disinfecting
Procedure for safely cleaning and disinfecting the incubator chamber and components.
Disinfecting Procedures Detailed
Detailed guidelines for effective and safe disinfection of the unit's interior surfaces.
Minimizing Contamination Exposure
Tips for reducing the risk of contamination within the incubator chamber.
Door Component Inspection
Regular checks for wear and tear on door latches, gaskets, and trim.
Electrical Component Note
Information that electrical components do not require maintenance; contact support for issues.
Storing the Incubator
Steps to prepare the incubator for extended periods of non-use to prevent contamination.
Calibrate the Temperature Display
Procedure for calibrating the unit's temperature display using a reference device.
Temperature Calibration Procedure Steps
Step-by-step guide for comparing reference device readings and adjusting incubator display.
Temperature Calibration Process Continuation
Continuing the calibration process by adjusting display values and allowing stabilization.
Temperature Calibration Finalization
Final steps to confirm calibration and troubleshoot if readings fall outside protocol.
Unit Specifications
Weight Specifications
Details on the shipping and net weight for SMI31 and SMI39 models.
Dimension Specifications
Exterior and interior dimensions provided in inches and millimeters for both models.
Chamber Volume Details
Cubic feet and liter capacity for SMI31 and SMI39 incubators.
Shelf Capacity Information
Maximum weight limits per shelf and total weight capacity for the incubators.
Temperature Specifications
Uniformity and stability specifications for SMI31 and SMI39 models.
Power Specifications
AC Voltage and Amperage ratings for SMI31 and SMI39 models.
Need help?
Do you have a question about the SMI31 and is the answer not in the manual?
Questions and answers