Related Manuals for Phantom v1840
Summarization of Contents
CHAPTER 1: CAMERA OVERVIEW
INTRODUCTION
Overview of Phantom Ultrahigh-Speed (UHS) cameras, their series and capabilities.
CAMERA CONTROL AND STORAGE
Details on On-Camera Control (OCC) menu, PCC software, and image storage.
ADDITIONAL FEATURES
Lists features like Programmable I/O, Auto-Trigger, Burst Mode, and Quiet Fans.
CHAPTER 2: CONNECTORS
Input and Output Ports
Describes Trigger, Timecode, I/O, HD-SDI ports on the camera.
Data and Control Connectors
Details Ethernet, Remote, Range Data, and GPS connectors.
Power Connectors
Explains primary and battery backup DC power input connectors.
CHAPTER 3: NETWORK SETUP & QUICK START GUIDES
ETHERNET CONNECTIVITY (1Gb & 10Gb)
Information on 1Gb and 10Gb Ethernet interfaces for camera connection.
CAPTURING AND SAVING CINES
Guides through launching PCC, setting parameters, and saving recordings.
LAUNCH PCC SOFTWARE
Steps to start and use the Phantom Camera Control software.
DEFINE RECORDING PARAMETERS
Setting resolution, sample rate, and exposure for captures.
REVIEW AND SAVE CINES
Procedures for reviewing, editing, and saving captured Cine files.
CHAPTER 4: ON-CAMERA CONTROLS & ON-SCREEN DISPLAYS
ON-CAMERA CONTROL BUTTONS
Explains the function of physical buttons on the camera.
MENU SYSTEM NAVIGATION
Guide to accessing and navigating the camera's menu system.
CAMERA MENU SETTINGS
Details the '1/6 CAMERA' menu page settings.
CHAPTER 5: WORKING WITH PHANTOM CINEMAGS
CINEMAG INTRODUCTION AND COMPATIBILITY
Overview of CineMag storage, compatibility, and usage.
SAVING AND ERASING CINEMAGS
Procedures for saving clips and erasing data from CineMags.
CINESTATION IV OPERATION
Information on using the CineStation IV for downloading data.
CHAPTER 6: PHANTOM PCC SOFTWARE
PCC SOFTWARE OVERVIEW
Introduction to the Phantom Camera Control software.
CAMERA CONTROL AND SETTINGS
How to control camera parameters and settings via PCC.
RECORDING AND TRIGGERING CINES
Steps for initiating and managing Cines recording and triggering.
CHAPTER 7: PROGRAMMABLE I/O SIGNAL ARCHITECTURE
PROGRAMMABLE I/O CONFIGURATION
Details on assigning and configuring programmable I/O ports.
PULSE PROCESSOR SETTINGS
Configuration options for signal pulse processing.
PROGRAMMABLE SIGNAL DESCRIPTIONS
Descriptions of standard programmable signals like Ready, Strobe, F-Sync.
CHAPTER 8: MEASUREMENTS
INSTANT MEASUREMENTS
Performing motion analysis tasks like distance, speed, and angle.
POINT COLLECTION AND TRACKING
Methods for collecting and tracking points for analysis.
DEFINE POINT PARAMETERS
Setting parameters for tracking points in images.
CHAPTER 9: ACCESSORIES
LENS MOUNTS AND INSTALLATION
Information on different lens mounts and their installation.
CONNECTOR PIN-OUTS
Detailed pin configurations for various camera connectors.
CHAPTER 10: FAQS & SUPPORT
FREQUENTLY ASKED QUESTIONS
Common questions and answers regarding camera operation and features.
CONTACT SUPPORT INFORMATION
Details for contacting Vision Research support.
Need help?
Do you have a question about the v1840 and is the answer not in the manual?
Questions and answers