Sony UP-DR200 Operating Instructions Manual page 10
Digital photo printer
Hide thumbs
Also See for UP-DR200:
- Brochure & specs (16 pages) ,
- Specifications (2 pages) ,
- Service manual (102 pages)
Table of Contents
Advertisement
Note
If you use the 2UPC-R204 series or 2UPC-R206 series
Printing Pack with the 152-mm (6-inch) paper width
after using the 2UPC-R203 series or 2UPC-R205 series
Printing Pack with the 127-mm (5-inch) paper width,
white stripes may appear on either side of printouts.
Be sure to clean the inside of the printer before printing
(page 24).
To load the paper roll
Notes
• Be sure to remove the output tray and the scrap
receptacle before loading the paper roll.
• Be careful that your fingers and clothing are not
caught in the paper door or on the protuberance in the
opening of the door.
1
Press and lower the paper door lever, hold the paper
door at the center portion, and pull the door forward
until it locks into the open position.
2
Remove the paper core from the printer.
Loading the Paper Roll and Ink Ribbon
3
Insert the paper core into the paper roll.
The two sides of the paper core are the same shape.
You can insert either side.
Notes
• If the edges of the paper on the roll are not aligned
before inserting the paper core, be sure to align
them while being careful not to bend or damage
them. Not doing so may result in malfunction.
• If the leading edge of the paper is bent or
damaged as a result of a paper jam, for example,
be sure to use scissors to cut off the damaged
portion, as shown, before inserting the paper.
• Do not bump the paper roll against hard objects or
squeeze it tightly. Doing so may bend or crease
the paper and affect print quality.
4
Depending on the width of your paper roll, attach or
remove the paper adapters.
Paper with 127-mm (5-inch) width: 2UPC-R203
series and 2UPC-R205 series Printing Pack
Attach the blue paper adapter to the left side of the
printer, and the pink paper adapter to the right side.
Page 10
Hide quick links:
Advertisement
Table of Contents
