Kyocera FS C5030N - Color LED Printer Product Manual page 28

FS-C5020N and FS-C5030N Controller FS-C5016N
Following is a brief overview of each area. For additional details please review
the FS-C5020N or FS-5030N User Manuals.
Firmware Version and Release Date
This area shows the version and release date of the Printer firmware.
Hardware Information
Here you will find information for the Paper Drawers and MPT such as: the
number of drawers, and the size and type of the paper installed. This area
will also list Printer settings, such as Buzzer OFF/On, the Host Buffer Size,
the Sleep Timer, and FormFeed Time Out Settings.
Page Information
This area displays the Number of Copies and Total Page Count and
whether Tone Mode is Normal or Fine.
Network Status
This area lists the IP Address, Subnet Mask, and default Gateway,
information for the installed Network Interface Card.
Memory
This area states the total memory installed, available memory space, and
the current status of the RAM Disk.
Installed Options
This area lists whether the HDD, Option ROM, and Memory Card are
installed.
Emulation
This area shows available emulations for the FS-C5020N or the FS-C5030N
(PCL 6 is the factory default). The emulations are: PCL 6, KPDL3, KC-GL.
Error Log
The last three errors, listed in order of occurrence, will be displayed here.
The most recent error will appear on the topmost line of the Log. Error
information is cleared when the printer is powered off.
Consumable Status
This area displays the approximate level of remaining toner. When the
Toner Counter states 100, the container is full. The closer the level gets to
zero, the emptier the toner cartridge becomes.
Interfaces
This area displays the standard and optional installed interfaces: Parallel,
Network, USB and Option.
FS-C5020N and FS-C5030N Product Guide
- 28 -