Clone Copying; Erasing Background Images; Deciding The Form Of Copy Output - Dell 1133 Mono Laser User Manual

6. Press Start ( ) on the control panel to begin copying.
Your original is divided into 9 portions. Each portion is scanned and printed one by one in the following order:

Clone copying

The machine prints multiple original images on a single page. The number of images is automatically determined by
the original image and the paper size.
1. Press Menu ( ) on the control panel.
2. Press the left/right arrow until Copy Feature appears and press OK.
3. Press the left/right arrow until Layout appears and press OK.
4. Press the left/right arrow until Clone Copy appears and press OK.
5. When Yes appears, press OK.
6. Press Start ( ) on the control panel to begin copying.
You cannot adjust the copy size using Reduce/Enlarge for the Clone Copy feature.

Erasing background images

This feature is helpful when copying originals containing color in the background, as in newspapers or catalogs.
1. Press Menu ( ) on the control panel.
2. Press the left/right arrow until Copy Feature appears and press OK.
3. Press the left/right arrow until Adjust Bkgd. appears and press OK.
4. Press the left/right arrow until the binding option you want appears.
Off: Disables this feature.
Auto: Optimizes the background.
Enhance Lev.1~2: The higher the number is, the more vivid the background is.
Erase Lev.1~4: The higher the number is, the lighter the background is.
5. Press OK to save the selection.
6. Press Stop/Clear ( ) to return to ready mode.

Deciding the form of copy output

You can set the machine to sort the copy job. For example, if you make 2 copies of a 3 page original, one complete 3
page document will print followed by a second complete document.
1. Place a single original face down on the scanner glass.
(See Loading originals).
2. Press OK and enter the number of copies using the left/right arrow.
3. Press Menu ( ) on the control panel.
4. Press the left/right arrow until Copy Setup appears and press OK.
5. Press the left/right arrow until Change Default appears and press OK.
6. Press the left/right arrow until Copy Collation appears and press OK.
7. Press the left/right arrow until On appears and press OK.
On: Prints output in sets to match the sequence of originals.